#picommu ⚠️ Warning for 3D printing pico MMU users. Using the MG996R servo with the Pico MMU and an EBB can overload and damage your board!This servo draws a lot of current — too much for the EBB alone.🔌 Instead, power it with a separate 5V supply to avoid voltage drops and burnt components.BUT! Don’t forget to connect the GND (ground) between your power supply and the EBB. This keeps the servo signal working properly.✅ All you need to do is find a free 3-pin port on your mainboard and declare
1:07
#picommu ⚠️ Warning for 3D printing pico MMU users. Using the MG996R servo with the Pico MMU and an EBB can overload and damage your board!This servo draws a lot of current — too much for the EBB alone.🔌 Instead, power it with a separate 5V supply to avoid voltage drops and burnt components.BUT! Don’t forget to connect the GND (ground) between your power supply and the EBB. This keeps the servo signal working properly.✅ All you need to do is find a free 3-pin port on your mainboard and declare
1.1K viewsMay 20, 2025
FacebookAI Robots TaoTac
See more
Static thumbnail place holder